In a previous article, I described the process by which you can make your own compost easily and inexpensively with garden / food production in the company for help. Here I would like the idea, with a design for a glass of compost mounted that time a little 'more and effort on your part is expanding, but are still performed with relatively little effort and are still in your quest for autarky edge preparation and emergencyEfforts.
You will need:
A large plastic barrel up to you - in my opinion, blue for 30-55 liter plastic food 48-inch piece of 2 inch Schedule 80 PVC Waste wood - 2x4s, better when treated Hinge Drill bits of various sizes Circular saw Other basic tools
Steps:
Drill a hole large enough to pass through the section of PVC in the top center and bottom of the barrel and then pass until as an axis with the unit actsat his side. Use scrap 2x4s to build a stand: two plates together on both sides for an "X" (four tables to make two "s") and then nailed the shape of the lower points of the two "s" axis horizontal in the front and back nailed to establish standing. They should, with six 2x4s to complete the whole. Place the barrel to rest in a horizontal position in the four upper points of the two "s" and all now acts as a sort of cradle. Use the saw to remove a section from the middle of the race, soyou can easily add and remove material from the compost. Use has been removed and the plastic hinges for connecting one section of a permanent port in the side wall of the composter. Using PVC as a handle, the barrel with the vent back to your compost.
And that's it! Lehman sold a similar composter in the $ 200 - $ 300, but do not sell will cost you anywhere near that. For best results, I would also suggest that you present your barrels of dark green or even blackTo begin with, because they hold heat better and more efficient by breaking down your compost.
0 comments:
Post a Comment